Show simple item record

dc.contributor.authorMadison, Adrienne Monique
dc.date.accessioned2014-03-04T21:13:24Z
dc.date.available2014-03-04T21:13:24Z
dc.date.issued2013-08
dc.identifier.othermadison_adrienne_m_201308_phd
dc.identifier.urihttp://purl.galileo.usg.edu/uga_etd/madison_adrienne_m_201308_phd
dc.identifier.urihttp://hdl.handle.net/10724/29111
dc.description.abstractFinite-element modeling (FEM), well-established to predict the mechanical behavior of mechanical systems, enjoys growing popularity in the study of the biomechanical behavior of biological tissues. This technique uses numerical methods to simulate material behavior under defined spatial constraints and load conditions. For this purpose, a system is decomposed into a large number of interacting volume elements, which can be described by a set of partial differential equations. Numerical methods are then employed to solve the equation system for the unknown quantities, such as deformation and stress. Contrary to mechanical systems, which can often be described analytically or with geometric primitives, biomedical objects require discretization of their often irregular shape. In noninvasive studies, imaging methods are used to obtain the geometry. Image-based finite-element models have a highly complex geometry, and the assignment of material properties to individual elements from image information is difficult. In this work, the four steps to obtain an image-based finite-element-based material simulation (segmentation, meshing, simulation, and post-processing) are described in detail, and strategies to overcome the specific challenges of image-based finite-element models are discussed. A completely open-source FEM toolchain was established which includes a custom meshing module. In comparison to results obtained from commercial systems, the open-source feature gives users the ability to modify and extend the code, and thus offers additional flexibility over commercial systems. A fully open-source toolchain is feasible, but the critical element is the meshing module. Lastly, a novel approach which implements FEM and medical imaging to approximate intracranial pressure using open-source software in settings where conventional monitoring techniques are unavailable is proposed. Emphasizing on the relationship between the cerebral perfusion pressure (CPP) and ICP, patterns of non-linear biomechanical behavior in biphasic analysis of normal and abnormal canine brains are observed and identified. The method presents a framework which can use material response to increased ICP as a diagnostic, treatment, or preventative method to assess levels of brain injury in clinical veterinary settings noninvasively while simultaneously introducing a free open-source software toolchain that can be used in any biomedical application, including analysis of bone, tissue and implants.
dc.languageeng
dc.publisheruga
dc.rightspublic
dc.subjectFinite Element Analysis
dc.subjectFEA
dc.subjectFinite Element Modeling
dc.subjectFEM
dc.subjectOpen-Source Software
dc.subjectMedical Image Segmentation
dc.subjectMesh Generation
dc.subjectTissue Biomechanics
dc.subjectVascular Grafts
dc.subjectIntracranial Pressure
dc.subjectBrain Parenchyma
dc.subjectCerebrospinal Fluid
dc.subjectCSF
dc.subjectNoninvasive
dc.subjectBiphasic
dc.subjectNon-Linear
dc.titleContributions to biomechanical finite element analysis for 3D medical images with open-source software
dc.typeDissertation
dc.description.degreePhD
dc.description.departmentBiological and Agricultural Engineering
dc.description.majorBiological and Agricultural Engineering
dc.description.advisorMark A. Haidekker
dc.description.committeeMark A. Haidekker
dc.description.committeeAjay Sharma
dc.description.committeeWilliam S. Kisaalita
dc.description.committeeSteven Holladay


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record